Respiratory Protection Program Practice Test

These questions are part of the practice quiz. Start practicing

• What is the typical indicator that a respirator cartridge or filter has reached end-of-service life?
• What is the purpose of maintaining documentation for fit testing and medical evaluations?
• Breathable air must meet minimum requirements for which grade of breathable air as described by CGA?
• Medical examinations should be done how often?
• What steps should be taken if a fit test fails?
• What is the recommended general procedure for cleaning respirators after use?
• What is an elastomeric respirator and when is it commonly preferred?
• What defines an oxygen-deficient atmosphere?
• What is required for a proper fit test?
• Which of the following describes critical steps during the donning and doffing of a tight-fitting respirator?
• All three listed disinfection methods for the respirator face piece are valid.
• What records should be maintained as part of the respirator program?
• What should be included in the annual respirator program evaluation?
• In terms of fit and use, how do loose-fitting PAPRs differ from tight-fitting respirators?
• Which respirator types are examples of atmosphere-supplying respirators (ASRs)?
• Which statement correctly describes qualitative and quantitative fit testing?
• How often must respirator fit testing be performed?
• SCBA shop is responsible for refilling size which oxygen cylinder sizes?
• When should tracking be placed to obtain more cylinders?
• What is the threshold percentage used to define oxygen deficiency in the atmosphere?
• Cylinder refill logs should be completed after each fill on which cylinders?
• The air analysis schedule is three months and is conducted by which entity?
• True or false: Employees must be clean shaven prior to fit test?
• The iodine disinfection solution consists of what concentration per gallon of water?
• Removing all traces of detergent and sanitizer from a respirator is important to prevent which condition in users?
• How long should daily SCBA checkout forms be kept in the station?
• Which recordkeeping elements are essential for a compliant RPP?
• How often should respiratory fit test be completed?
• How might pregnancy affect respirator selection and medical evaluation?
• Which statement about seal checks is accurate?
• SCBA shop delivers which type of cylinders to EMS hubs?
• When cleaning the mask of an SCBA, use a soap and water solution of no more than what degrees Fahrenheit?
• How is the Respiratory Protection Program evaluated and updated?
• Which statement best describes the fit and use of tight-fitting respirators versus loose-fitting PAPRs?
• Which frequency applies to the Chest X-Ray if not otherwise requested?
• Which numeric option is a likely quantity for EMS M cylinders?
• Which of the following is an alcohol-based method to disinfect the respirator face piece?
• What accessory is recommended for storing respirators to protect them?
• In the Respiratory Protection Program, what is the primary role of engineering controls?
• OCFRD uses what kind of cascade filling system?
• Which record category is essential for tracking ongoing health and safety aspects of respirator use?
• Which statement describes a loose-fitting hood's protection mechanism?
• How should a workspace be arranged to store used respirators and prevent cross-contamination?
• What does maintenance of respirators include?
• NIOSH stands for which organization?
• In the context of the equipment program, OCFRD stands for which department?
• Should field repairs be performed by non-approved personnel? Why or why not?
• Which option best describes the purpose of a fit test?
• What is a 'fit factor' in quantitative fit testing, and what are typical OSHA pass criteria for half-face vs full-face respirators?
• Disposable respirator approval must be obtained from which agency?
• What is the purpose of a written Respiratory Protection Program document?
• Which of the following is NOT a non disposable airborne pathogen respirator model?
• Which of the following statements is true regarding cleaning a respirator?
• Into which component are the oil and water discharged from the separator in the cascade system?
• When should cartridge changes be scheduled for a contaminant mixture?
• Which topic is addressed under the 'use and limitations' element of a respirator program?
• Under OSHA, when is an RPP triggered in a facility?
• What is the purpose of a medical evaluation in the Respiratory Protection Program?
• Which statement correctly distinguishes organic vapor cartridges from acid gas cartridges?
• If a respirator's facepiece is damaged or head straps are broken, what should you do?
• In oxygen-deficient atmospheres, which statement is true about respirator use?
• A respirator user’s responsibilities in a program?
• Which regulation number governs Respiratory Protection in OSHA?
• RAD-57 placed on a finger is used to measure which parameter?
• How should respirators be stored to maintain integrity?
• Which documents outline the medical evaluation process for respirator use?
• EMS hubs should have how many M cylinders?
• What is the purpose of the OSHA medical evaluation questionnaire for respirator use, and how should privacy be handled?
• Chest X-Ray: How often is it performed?
• Which statement best describes a quantitative fit test?
• Which statement accurately describes what it means for a respirator to be NIOSH-approved?
• After how long should SCBA checkout forms be filed and sent to records?
• Which sequence correctly describes cleaning and decontaminating reusable respirators between uses?
• Why is periodic program evaluation important?
• Protacount Plus is used for which testing process in OCFRD's program?
• When should engineering controls be prioritized over PPE?
• Which option is NOT a numeric station number in the 'Stations without booster pumps' list?
• Who should calibrate and maintain fit testing equipment?
• Which step focuses on selecting equipment approved for a function?
• Which of the following is listed in the material under 'Stations without booster pumps'?
• Which age group is specified for the Stress EKG eligibility?
• True or False: You can submerge a respirator in water.
• What is the minimum O2 level considered safe for a fit-testing atmosphere?
• How should reusable respirators be decontaminated after exposure?
• Who is responsible for performing seal checks in a respirator program?
• Who is responsible for calibrating fit testing equipment?
• Full-face respirators provide eye/face protection; what must be checked for compatibility with eyewear?
• How should respirators be stored to maintain their integrity?
• How often should the Respiratory Protection Plan be reviewed by personnel?
• Which feature best describes elastomeric respirators?
• The respirator label conveys information about which of the following?
• Which activity is primarily associated with cleaning and disinfection rather than routine inspection?
• The air analysis is performed every three months by which entity?
• Which records are typically kept to demonstrate compliance with the RPP and training requirements?
• Which statement about PAPRs is true?
• Which medical tests are mentioned as part of the respiratory protection program?
• What is the difference between a tight-fitting respirator and a loose-fitting hood?
• What does Grade D air ensure?
• Who is responsible for end-of-service-life for respirator cartridges, and how is it determined?
• What is the first basic step in choosing proper respiratory equipment?
• RAD-57 reading of 15% in pediatric patients requires consideration for hyperbaric center referral.
• Which records are typically kept to demonstrate compliance with the Respiratory Protection Program and training requirements?
• When is a medical evaluation required for workers who must wear respirators?
• Are contact lenses compatible with respirator use?
• What is the primary purpose of donning and doffing procedures?
• What is the primary purpose of the RAD-57 device during testing?
• How does the Respiratory Protection Program relate to the hierarchy of controls?
• Which statement describes the relationship between engineering controls and respirators in a Respiratory Protection Program?
• What triggers re-evaluation of a worker’s medical clearance for respirator use?
• How should respirator training address eyewear interference?
• What is a common factor that can cause a tight-fitting respirator to fail its seal?
• RAD-57 reading of 25% in adults requires consideration for hyperbaric center referral.
• How should exposure monitoring data influence respirator selection?
• What is the responsibility of the supervisor regarding respirator use in their crew?
• What is the difference between a pre-use inspection and a post-use inspection, and what should be checked?
• What is a 'user seal check' and why is it performed?
• In addition to selecting a respirator, which activities are required to ensure ongoing effectiveness of the RPP?
• A booster pump in the cylinder refilling system can increase the number of refills up to what percentage?
• When must a fit test be performed for a user to wear a tight-fitting respirator in the workplace?
• What are the key elements that must be documented in an RPP?
• What is the purpose of medical clearance in the respirator program?
• Which item is NOT typically included in essential RPP records?
• Why must respirator users avoid using damaged or contaminated equipment?
• Which step in choosing respiratory equipment ensures the device performs its intended function?
• What is the typical practice regarding reuse of disposable respirators?
• How is cartridge breakthrough detected, and what actions should be taken?
• Which machine does OCFRD use for fit testing?
• What are the main considerations when selecting a respirator for a given hazard?
• What should an emergency plan include for respirator use?
• What does the P100 designation indicate about filters?
• Which organization is cited in relation to respiratory protection standards?
• Protacount Plus is used to perform which testing process?
• What is the difference between a user seal check and a fit test, and when should each be performed?
• In what scenarios are escape respiratory protection devices used and what are their limitations?
• Why should a fit test be performed with the actual respirator model used on the job?
• What is the main purpose of respirator user training?
• Stress EKG will be provided to which group and how often?
• What unit is used to express the cylinder filling rate?
• What is the primary purpose of a Respiratory Protection Program (RPP) in the workplace?
• When must a medical evaluation be provided to an employee?
• If significant changes occur to fit testing or respirator use, what action is required regarding fit testing?
• What is a key outcome of a routine program update after an audit?
• Which item would likely be part of a respiratory protection program context as per the material?
• Who is responsible for maintenance and repair of respirators in a workplace program?
• Which is a limitation of qualitative fit testing?
• Which record is essential to demonstrate ongoing compliance for respirator maintenance?
• What does an M cylinder refer to in respiratory protection?
• RAD-57 reading of 15% in pregnant women requires consideration for hyperbaric center referral.
• How often should the compressor reservoir be drained?
• What should be done if procedures or hazards change?
• When are air-purifying respirators not appropriate to use?
• Cosmetic makeup may be required to be removed for successful fit testing.
• Which statement about fit-testing re-testing is accurate?
• Which statement about an Air-Purifying Respirator (APR) system is accurate?
• Why are facial hair policies important for tight-fitting respirators?
• Which of the following is NOT a core element of a written Respiratory Protection Program?
• Which bureau is responsible for preparing and maintaining the Respiratory Protection Program?
• What is the purpose of keeping maintenance records for respirators?
• What is the role of engineering controls in the Respiratory Protection Program?
• What consideration is essential for compatibility with other PPE?
• The HYDRO date is updated every how many years?
• What does a quantitative fit test assess?
• Grade D breathing air is important for supplied-air respirators because it meets basic quality standards, including safe oxygen levels and low contaminants.
• How do you select appropriate filters and cartridges for a combined air-purifying respirator?
• What is the purpose of program evaluation and recordkeeping in a respirator program?
• Who bears the cost of medical evaluations and training?
• How should fit test records be retained?
• How must medical evaluation records be handled?
• What are the two broad categories of respirators used in workplace protection?
• What is the difference between qualitative and quantitative fit testing?
• How often must workers receive respirator training?
• Cylinders should be filled at a rate of how many pounds per minute?
• What does Assigned Protection Factor (APF) represent in respirator selection?
• Which is a common example of a qualitative fit test?
• How does a positive pressure seal check differ from a negative pressure seal check?
• When selecting a respirator cartridge for a contaminant, what must you verify?
• Which cylinder size is delivered to EMS hubs by the SCBA shop?
• What environmental considerations should be addressed during fit testing in hot or humid environments to maintain validity?
• Under what conditions is reuse of disposable respirators allowed?
• Smoker should not smoke for at least how long prior to a fit test?
• When using a full-face respirator, what must be checked regarding eyewear?
• IDLH stands for Immediately Dangerous to Life and Health; in IDLH conditions, which respirators are typically required?
• OCFRD's air compressors will have air quality test performed how often?
• Which combination represents a safe atmosphere reading during fit testing?
• After a respirator is repaired, what checks must be performed before returning to service?
• Which of the following is NOT a method to disinfect the respirator's face piece?
• How should you check the operation of an SCBA?
• What facial hair practices impact the effectiveness of tight-fitting respirators and what is the policy approach?
• Compressors in OCFRD have automatic drains that activate how often?
• The breathable air grade information is associated with which organization?
• Which fit testing method uses an instrument to measure fit factor?
• Two main methods of conducting respirator fit testing?
• Which option represents a non-numeric entry in the 'Stations without booster pumps' list?
• RAD-57 shouldn't be placed on which finger?
• What are the common inspection steps before using a respirator?
• What does the acronym SCBA stand for?
• Seal checks, fit testing, and why they matter in respirator use.
• Which item is most essential to demonstrate ongoing program effectiveness during audits?
• In which scenarios is a powered air-purifying respirator (PAPR) preferred over a tight-fitting respirator?
• The hypochlorite disinfection solution is prepared using how much chlorine bleach per gallon of water?
• How should the work environment be controlled alongside an RPP?
• OSHA permissible exposure limit for carbon monoxide over an eight hour period is:
• Which statement accurately describes cleaning and reuse for disposable versus elastomeric respirators?
• Respirator repair is handled by which facility?
• What is the purpose of fit testing within the respirator program?
• In cascade systems, what two components separate oil and water from breathing air?
• How often shall training be done on proper use and donning of SCBA?
• What does a respirator fit test primarily assess?
• Who is responsible for ensuring that an RPP is implemented and maintained in a workplace?
• Who is responsible for delivery of size D oxygen cylinders to stations?
• In the context of the material, what situation is described by 'Stations without booster pumps'?
• Which action is suggested when you have four full cylinders left?
• Test subject for fit test shall wear the face piece for a minimum of ____.
• Why is facial hair a concern for tight-fitting respirators?
• Which respirators are appropriate in IDLH environments?
• Which organization sets regulatory requirements for respiratory protection programs?
• Orange County fire rescue meets the requirements for what grade air?
• The compressor reservoir stores which two substances discharged from the separator?
• On which date did OCFRD start exclusively using quantitative fit testing?
• Cylinder hydro date for SCBA cylinders should be performed how often?
• When allergies are a concern, which statement best guides respirator selection?
• What indicates that a respirator is NIOSH-approved?
• Which statement about quantitative fit testing is true?
• Which of the following is a core element required in a written Respiratory Protection Program?
• What is the role of periodic program evaluation in response to changes in hazards and technology?
• Name three core topics that must be covered in respirator training.
• Define IDLH and its implications for respirator choice.
• When should the Respiratory Protection Program be used within the hierarchy of controls?
• What is a PAPR and in what scenarios is it typically used?
• What is the maximum CO reading considered safe for a fit-testing atmosphere?
• What does IDLH stand for in respiratory protection terminology?
• Since 2004, the fit testing method used by OCFRD is exclusively which type?
• Before selecting respirators, which hazard information must be determined?
• Which statement about cartridge color-coding is true?
• Why is it important to perform a fit test with the actual respirator model used on the job?
• What calibration considerations are necessary for fit-testing equipment?
• What are the typical components of an Air-Purifying Respirator (APR) system?